BluePrint 350 Chevy Dressed Longblock with Carburetor, Pulley Kit

• 365 HP and 405 Ft/lbs Torque
• Compression Ratio: 9.1:1
• Cast Iron Heads
• Roller Cam
• Cast Steel Crank
• Hypereutectic Pistons

BLOCK:

• Hand picked seasoned block
• Square and parallel decked
• Align honed main bearing bore
• Cylinders honed on computer controlled machine to within .0002 straightness and roundness
• Cylinders are sonic tested for thickness
• 4-Bolt Main
• 4.000" Bored .040" Over
• 1-Piece Rear Main Seal
• Mech fuel pump provision: Yes
• Passenger Side Dipstick Drilled and tapped for clutch linkage

ROTATING ASSEMBLY:

• Cast steel crankshaft
• 3.480" Stroke
• OEM type 5.700" connecting rods w/ 150,000 psi bolts
• Hypereutectic pistons
• Internal Front/ External Rear

CYLINDER HEADS:

• Vortec cast iron cylinder heads
• 1.25" diameter valve springs
• Hardened retainers and springs
• 1.94" swirl polished intake valves
• 1.50: swirl polished exhaust valves
• 1.5:1 long slot, stamped steel rockers
• Hardened push rods

CAM SPECS:

• Flat Tappet Cam
• .495 Intake / .502 Exhaust
• 220 Intake / 224 Exhaust Duration
• @ .050 - 114 Degree Lobe Separation
• Using 1.5 rockers

IGNITION TIMING:

• 10-16 degrees initial, 32-34 total

ALSO INCLUDES:

• Satin aluminum dual-plane intake manifold
• 600cfm carburetor
• HEI distributor
• Harmonic balancer
• Serpentine front drive pulley system
• Fuel pump & braided line
• Water pump
• Alternator
• Power steering pump
• AC compressor
• Flexplate
• Thermostat & housing
• Plug wires
• Spark plugs
• Chrome steel valve covers
• Timing cover
• Oil pan
• Brass freeze plugs
• Dyno test results shipped with engine

WARRANTY:

• 30 month / 50,000 mile

NOTES:

• Recommended Oil For Your BluePrint Crate Engine: BPP710 BluePrint Engines break-in oil
• Not For EGR